We have two decades of successful history of production and supply of

KALMATRON® KF-F for stucco repair. This is a yellow powder mixed with water that

becomes a viscous paste applicable as a thin layer by any paint application technique.       

KALMATRON® KF-F is a protective and crack curing composition which penetrates

into the cementitious structure applicable in dry, hot, as well as damp environments.

The application of KALMATRON KF-F produces superficial strength, waterproofing and

highest resistance to chemical and environmental corrosions.

• General properties of KF-F coats applied by any techinque are the same as shown on the table above.  
  

         But application by spray "A" and by brush or roll "B" causing some difference in repellence to water.

• Application by spray "A" results in KF-F surface with water sorption ability up to .045% which is lower
  

         by 88% than lowest known of 4% sorption ability. Practically, it is implausible as sorption ability.

• Application by brush or roll "B" results in KF-F surface with absolute repellence to any liquid. 
  

Stucco repair is not resurfacing only, but restoration of its microbial balance and liquid impermeability.

A

B

KALMATRON® KF-F known in Europe as K1OO®-F is in use for

restoration of concrete canals impermeability on nuclear plants.

As it shown, chosen method of application is a spray.

Stucco texture after the spray

Stucco texture after the brush